Unexplained Network Access
Posted: Fri Aug 08, 2014 1:38 pm
Hi!
I tried to install my application on a customer's site and got the following behaviour:
In my application I call the following code:
This both calls take about 100 ms on my development machine, on the customer's PC it takes about forever (39 seconds to be exact).
I used procmon.exe to check what's going on and there is a lot of access to the following adresses (logfile scan.xlsx in the attached zip)
a212-152-163-18.deploy.akamaitechnologies.com
ocsp.ams1.verisign.com
a23-54-101-163.deploy.static.akamaitechnologies.com
I discovered that the same accesses are happening (logfile regasm.xlsx in the attached zip) when registering GdPicture.NET.9.dll using the following command:
If the startup time was so high only once it would be not so bad, but this happens everytime AND it happens everytime I use GdPicture to convert a file.
I tried to regasm some other .NET-DLL and there were NO network-accesses...
Can you please tell me, what's going on and how to change this? I have NO access to the internet on my customer's machine and I'm quite sure I will not get it just to be able to register the components...
GdPicture.NET.9
Windows 7/64
Best Regards
Michael Asteriou
I tried to install my application on a customer's site and got the following behaviour:
In my application I call the following code:
Code: Select all
oLicMan.RegisterKEY <my GdPicture 8 License>
oLicMan.RegisterKEY <my GdPicture 9 License>
I used procmon.exe to check what's going on and there is a lot of access to the following adresses (logfile scan.xlsx in the attached zip)
a212-152-163-18.deploy.akamaitechnologies.com
ocsp.ams1.verisign.com
a23-54-101-163.deploy.static.akamaitechnologies.com
I discovered that the same accesses are happening (logfile regasm.xlsx in the attached zip) when registering GdPicture.NET.9.dll using the following command:
Code: Select all
RegAsm.exe GdPicture.NET.9.dll /codebase /tlb
I tried to regasm some other .NET-DLL and there were NO network-accesses...
Can you please tell me, what's going on and how to change this? I have NO access to the internet on my customer's machine and I'm quite sure I will not get it just to be able to register the components...
GdPicture.NET.9
Windows 7/64
Best Regards
Michael Asteriou