can't find scanner...

Discussions about TWAIN & WIA scanning in GdPicture.NET using GdPictureImaging.
Post Reply
EricChange
Posts: 2
Joined: Tue Aug 11, 2015 5:41 am

can't find scanner...

Post by EricChange » Tue Aug 11, 2015 5:56 am

It's pop up an error message that show "No Target Device (ID:3056)" when i call _oGdPictureImaging.TwainOpenDefaultSource(Me.Handle) on form load...

My scanner is HP LaserJet M1530 MFP Series PCL 6

I had removed driver and install again, but it's still pop up the same error message...

It's normal not long ago, i don't know why become this

Who can tell me how to solve this problem,because it's important to me

Thanks~

PS:The TwainLogStart is below

#GdTwain Log Start. Version: 653

RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 1
-------------------
Start: OpenSourceManager.
RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 1
-------------------
standard DSM 32-bit library loaded: C:\windows\TWAIN_32.DLL
RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 1
-------------------
Entry point of the standard DSM found.
RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 1
-------------------
End: OpenSourceManager.
RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 3
-------------------
Start: OpenDefaultSource.
RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 3
-------------------
GDTWAIN_Mgr: Start Getting DAT_STATUS
RC: TWRC_FAILURE
CC: TWCC_SUCCESS
State: 3
-------------------
GDTWAIN_Mgr: End Getting DAT_STATUS
RC: TWRC_FAILURE
CC: TWCC_BADPROTOCOL
State: 3
-------------------
End: OpenDefaultSource.
RC: TWRC_FAILURE
CC: TWCC_BADPROTOCOL
State: 3
-------------------
GetCapCurrent: Can't get capability value below State 4.
RC: TWRC_FAILURE
CC: TWCC_NODS
State: 3
-------------------
GetValidHwnd: Creating Proxy window.
RC: TWRC_FAILURE
CC: TWCC_NODS
State: 3
-------------------
Start: CloseSourceManager.
RC: TWRC_FAILURE
CC: TWCC_NODS
State: 3
-------------------
GDTWAIN_Mgr: Start Getting DAT_STATUS
RC: TWRC_FAILURE
CC: TWCC_NODS
State: 3
-------------------
GDTWAIN_Mgr: Can't get DAT_STATUS !!
RC: TWRC_FAILURE
CC: TWCC_NODS
State: 3
-------------------
GDTWAIN_Mgr: End Getting DAT_STATUS
RC: TWRC_FAILURE
CC: TWCC_BUMMER
State: 3
-------------------
End: CloseSourceManager.
RC: TWRC_FAILURE
CC: TWCC_BUMMER
State: 3
-------------------
Window Proxy Destroyed !
RC: TWRC_FAILURE
CC: TWCC_BUMMER
State: 3
-------------------
Start: UnloadSourceManager.
RC: TWRC_FAILURE
CC: TWCC_BUMMER
State: 3
-------------------
End: UnloadSourceManager.
RC: TWRC_SUCCESS
CC: TWCC_SUCCESS
State: 1
-------------------
#GdTwain Log Stop.
Attachments
error.jpg
error.jpg (12.29 KiB) Viewed 16579 times

User avatar
Loïc
Site Admin
Posts: 5881
Joined: Tue Oct 17, 2006 10:48 pm
Location: France
Contact:

Re: can't find scanner...

Post by Loïc » Fri Aug 14, 2015 10:08 pm

Hello,

This error message comes from your TWAIN driver. You should check that it is correctly installed and up to date, try with latest TWAIN API etc... Here all details: viewtopic.php?t=1486

If the problem persists this can be a hardware failure, the device manufacturer should be able to offer some help regarding the signification of the error code.

I hope this helps!

With best regards,

Loïc

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest