JSON String Dump When Saving

Discussions about DocuVieware integration in GdPicture.NET.
Post Reply
OleBroseph
Posts: 11
Joined: Thu Jun 06, 2019 11:07 pm

JSON String Dump When Saving

Post by OleBroseph » Fri Oct 04, 2019 6:26 pm

Hi,

When trying to save a file, we receive the attached JSON string dump. The DocuVieware API service is not returning any errors so everything seems to be working based on appearances.

Any ideas?
Attachments
JSONdump.PNG
JSONdump.PNG (9.14 KiB) Viewed 6289 times

User avatar
Loïc
Site Admin
Posts: 5881
Joined: Tue Oct 17, 2006 10:48 pm
Location: France
Contact:

Re: JSON String Dump When Saving

Post by Loïc » Tue Oct 08, 2019 1:47 pm

Hi,

You should first check you are using our latest release. If the problem persists we will need some more information to understand and eventually replicate it.

With best regards,

Loïc

OleBroseph
Posts: 11
Joined: Thu Jun 06, 2019 11:07 pm

Re: JSON String Dump When Saving

Post by OleBroseph » Tue Oct 08, 2019 4:04 pm

Hi,

We are currently using version 3.1.39. This was a problem that was encountered before we upgraded as well. What information is required to help further diagnose this issue?

Something similar also occurs when we try to print a document.

Thanks!

User avatar
Loïc
Site Admin
Posts: 5881
Joined: Tue Oct 17, 2006 10:48 pm
Location: France
Contact:

Re: JSON String Dump When Saving

Post by Loïc » Tue Oct 08, 2019 6:58 pm

Well any information would be helpful. We basically need to know what you are doing.

OleBroseph
Posts: 11
Joined: Thu Jun 06, 2019 11:07 pm

Re: JSON String Dump When Saving

Post by OleBroseph » Tue Oct 08, 2019 10:27 pm

I've included a gif of the action (and the built in API method just in case that needed to be reviewed). If there is anything else you think would be helpful, then feel free to ask.
Attachments
Save Issue.gif
Save API Method.png
Save API Method.png (10.25 KiB) Viewed 6225 times

OleBroseph
Posts: 11
Joined: Thu Jun 06, 2019 11:07 pm

Re: JSON String Dump When Saving

Post by OleBroseph » Thu Oct 10, 2019 2:27 pm

Hi!

I figured out the issue. We needed to install the Microsoft.AspNetCore.Mvc.WebApiCompatShim so we could add in AddWebApiConventions() into our Startup.cs.

Thanks!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest