SetFillAlpha Method (GdPicturePDF)
In This Topic
Sets the transparency level (the current non-stroking alpha constant) for all subsequent filling (non-stroking) operations, means those with the defined Fill parameter, like the
GdPicturePDF.DrawCircle method or the
GdPicturePDF.DrawRectangle method. This constant specifies the constant shape or constant opacity value. The initial value is set to 255.
The alpha constant parameter is one of the graphics state parameters. These parameters are initialized to their default values at the beginning of each page (see PDF Reference, Section "Graphics State").
Syntax
Parameters
- Alpha
- A new value for the transparency level. Use the value between 0 (full transparency) and 255 (full opacity).
Return Value
A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.
We strongly recommend always checking this status first.
Example
How to set the transparency to be used when filling various drawn rectangles.
Dim caption As String = "Example: SetFillAlpha"
Dim gdpicturePDF As New GdPicturePDF()
Dim status As GdPictureStatus = gdpicturePDF.NewPDF()
If status = GdPictureStatus.OK Then
gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft)
gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter)
If (gdpicturePDF.NewPage(210, 297) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.ResetGraphicsState() = GdPictureStatus.OK) AndAlso 'The default graphics state is set.
(gdpicturePDF.SetLineWidth(3) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineColor(0, 0, 255) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillColor(0, 255, 255) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(70, 10, 60, 30, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(70, 80, 60, 30, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(70, 150, 60, 30, True, True) == GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineColor(255, 165, 0) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillColor(188, 143, 143) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineWidth(8) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(10, 25, 180, 40, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineAlpha(200) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillAlpha(200) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(10, 95, 180, 40, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineAlpha(100) == GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillAlpha(100) == GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(10, 165, 180, 40, True, True) == GdPictureStatus.OK) Then
status = gdpicturePDF.SaveToFile("test_Lines.pdf")
If status = GdPictureStatus.OK Then
MessageBox.Show("The example has been followed successfully and the file has been saved.", caption)
Else
MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption)
End If
Else
MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)
End If
Else
MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption)
End If
gdpicturePDF.Dispose()
string caption = "Example: SetFillAlpha";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
GdPictureStatus status = gdpicturePDF.NewPDF();
if (status == GdPictureStatus.OK)
{
gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft);
gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter);
if ((gdpicturePDF.NewPage(210, 297) == GdPictureStatus.OK) &&
(gdpicturePDF.ResetGraphicsState() == GdPictureStatus.OK) && //The default graphics state is set.
(gdpicturePDF.SetLineWidth(3) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineColor(0, 0, 255) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillColor(0, 255, 255) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(70, 10, 60, 30, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(70, 80, 60, 30, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(70, 150, 60, 30, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineColor(255, 165, 0) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillColor(188, 143, 143) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineWidth(8) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(10, 25, 180, 40, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineAlpha(200) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillAlpha(200) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(10, 95, 180, 40, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineAlpha(100) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillAlpha(100) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(10, 165, 180, 40, true, true) == GdPictureStatus.OK))
{
status = gdpicturePDF.SaveToFile("test_Lines.pdf");
if (status == GdPictureStatus.OK)
MessageBox.Show("The example has been followed successfully and the file has been saved.", caption);
else
MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption);
}
else
MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);
}
else
MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption);
gdpicturePDF.Dispose();
Example
How to set the transparency to be used when filling various drawn rectangles.
Dim caption As String = "Example: SetFillAlpha"
Dim gdpicturePDF As New GdPicturePDF()
Dim status As GdPictureStatus = gdpicturePDF.NewPDF()
If status = GdPictureStatus.OK Then
gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft)
gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter)
If (gdpicturePDF.NewPage(210, 297) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.ResetGraphicsState() = GdPictureStatus.OK) AndAlso 'The default graphics state is set.
(gdpicturePDF.SetLineWidth(3) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineColor(0, 0, 255) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillColor(0, 255, 255) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(70, 10, 60, 30, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(70, 80, 60, 30, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(70, 150, 60, 30, True, True) == GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineColor(255, 165, 0) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillColor(188, 143, 143) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineWidth(8) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(10, 25, 180, 40, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineAlpha(200) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillAlpha(200) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(10, 95, 180, 40, True, True) = GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetLineAlpha(100) == GdPictureStatus.OK) AndAlso
(gdpicturePDF.SetFillAlpha(100) == GdPictureStatus.OK) AndAlso
(gdpicturePDF.DrawRectangle(10, 165, 180, 40, True, True) == GdPictureStatus.OK) Then
status = gdpicturePDF.SaveToFile("test_Lines.pdf")
If status = GdPictureStatus.OK Then
MessageBox.Show("The example has been followed successfully and the file has been saved.", caption)
Else
MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption)
End If
Else
MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)
End If
Else
MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption)
End If
gdpicturePDF.Dispose()
string caption = "Example: SetFillAlpha";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
GdPictureStatus status = gdpicturePDF.NewPDF();
if (status == GdPictureStatus.OK)
{
gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft);
gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter);
if ((gdpicturePDF.NewPage(210, 297) == GdPictureStatus.OK) &&
(gdpicturePDF.ResetGraphicsState() == GdPictureStatus.OK) && //The default graphics state is set.
(gdpicturePDF.SetLineWidth(3) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineColor(0, 0, 255) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillColor(0, 255, 255) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(70, 10, 60, 30, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(70, 80, 60, 30, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(70, 150, 60, 30, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineColor(255, 165, 0) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillColor(188, 143, 143) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineWidth(8) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(10, 25, 180, 40, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineAlpha(200) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillAlpha(200) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(10, 95, 180, 40, true, true) == GdPictureStatus.OK) &&
(gdpicturePDF.SetLineAlpha(100) == GdPictureStatus.OK) &&
(gdpicturePDF.SetFillAlpha(100) == GdPictureStatus.OK) &&
(gdpicturePDF.DrawRectangle(10, 165, 180, 40, true, true) == GdPictureStatus.OK))
{
status = gdpicturePDF.SaveToFile("test_Lines.pdf");
if (status == GdPictureStatus.OK)
MessageBox.Show("The example has been followed successfully and the file has been saved.", caption);
else
MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption);
}
else
MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);
}
else
MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption);
gdpicturePDF.Dispose();
See Also