DrawImage Method (GdPicturePDF)

In This Topic

Draws an image, specified by its resource name, onto the exactly defined area of the currently selected page of the loaded PDF document. The image already needs to be included in the current document as a resource using one of the AddImage... methods().

The coordinates and the dimensions of the destination area need to be set in the current units defined in the PDF document, related to the actual page, where the required image is to be drawn. You can use the GetMeasurementUnit method to determine the currently defined units and you can use the SetMeasurementUnit method to reset the units according to your preference.

Syntax

Visual Basic
C#
Delphi
JScript
Managed Extensions for C++
C++/CLI

'Declaration

 

Public Function DrawImage( _

   ByVal ImageResName As String, _

   ByVal DstX As Single, _

   ByVal DstY As Single, _

   ByVal Width As Single, _

   ByVal Height As Single _

) As GdPictureStatus

public GdPictureStatus DrawImage( 

   string ImageResName,

   float DstX,

   float DstY,

   float Width,

   float Height

)

public function DrawImage( 

    ImageResName: String;

    DstX: Single;

    DstY: Single;

    Width: Single;

    Height: Single

): GdPictureStatus;

public function DrawImage( 

   ImageResName : String,

   DstX : float,

   DstY : float,

   Width : float,

   Height : float

) : GdPictureStatus;

public: GdPictureStatus DrawImage( 

   string* ImageResName,

   float DstX,

   float DstY,

   float Width,

   float Height

)

public:

GdPictureStatus DrawImage( 

   String^ ImageResName,

   float DstX,

   float DstY,

   float Width,

   float Height

)

Parameters

ImageResName: The image resource name of the required image as a string.
You can obtain this name using one of these methods: AddImageFromBitmap(Bitmap,Boolean,Boolean) , AddImageFromGdPictureImage(Int32,Boolean,Boolean), GetPageImageResName or any of the AddJpegImageFrom...() methods. For further assistance, please see the Images section of the GdPicturePDF class in the Reference Guide.
DstX: The horizontal (X) coordinate of the bottom left point of the destination area, where the image is to be drawn, expressed in the current units specified by the SetMeasurementUnit method, related to the currently selected page.
DstY: The vertical (Y) coordinate of the bottom left point of the destination area, where the image is to be drawn, expressed in the current units specified by the SetMeasurementUnit method, related to the currently selected page.
Width: The width of the destination area, expressed in the current units specified by the SetMeasurementUnit method.
Height: The height of the destination area, expressed in the current units specified by the SetMeasurementUnit method.

Return Value

A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.

We strongly recommend always checking this status first.

Remarks

This method is only allowed for use with non-encrypted documents.

Just to remind you that if the image to draw is a Mask Image, you should define the color for non-stroking operations by using the SetFillColor(Byte,Byte,Byte) method.

Be aware that DstX and DstY parameters are fixly determined as the coordinates of the bottom left point of the destination area on the actual page.

We also recommend to take advantage of the GdPictureImaging class and its methods for further manipulation with images.

Example

These examples show you how to draw an image loaded from different resources using different methods - the first image is loaded from the external file and the second image is loaded from the current PDF document.

How to draw a jpeg image, loaded from the external file, onto the first page of the newly created PDF document twice, side by side, within the two same-sized areas.

VB.NET
C#

Dim caption As String = "Example: DrawImage"

Dim gdpicturePDF As New GdPicturePDF()

If (gdpicturePDF.NewPDF() = GdPictureStatus.OK) AndAlso

   (gdpicturePDF.NewPage(PdfPageSizes.PdfPageSizeA4) = GdPictureStatus.OK) Then

    Dim image_name As String = gdpicturePDF.AddJpegImageFromFile("image.jpg")

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        Dim width As Single = gdpicturePDF.GetPageWidth()

        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

            Dim height As Single = gdpicturePDF.GetPageHeight()

            If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

                'the new height of the destination area

                height = height / 2

                If (gdpicturePDF.SelectPage(1) = GdPictureStatus.OK) AndAlso

                   (gdpicturePDF.DrawImage(image_name, 0, 0, width, height) = GdPictureStatus.OK) AndAlso

                   (gdpicturePDF.DrawImage(image_name, 0, height, width, height) = GdPictureStatus.OK) Then

                    Dim status As GdPictureStatus = gdpicturePDF.SaveToFile("test_DrawImage.pdf")

                    If status = GdPictureStatus.OK Then

                        MessageBox.Show("The example has been followed successfully and the file has been saved.", caption)

                    Else

                        MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption)

                    End If

                Else

                    MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)

                End If

            Else

                MessageBox.Show("The GetPageHeight() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)

            End If

        Else

            MessageBox.Show("The GetPageWidth() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)

        End If

    Else

        MessageBox.Show("The AddJpegImageFromFile() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)

    End If

Else

    MessageBox.Show("The NewPDF() method or the NewPage() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)

End If

gdpicturePDF.Dispose()

string caption = "Example: DrawImage";

GdPicturePDF gdpicturePDF = new GdPicturePDF();

if ((gdpicturePDF.NewPDF() == GdPictureStatus.OK) &&

    (gdpicturePDF.NewPage(PdfPageSizes.PdfPageSizeA4) == GdPictureStatus.OK))

{

    string image_name = gdpicturePDF.AddJpegImageFromFile("image.jpg");

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

    {

        float width = gdpicturePDF.GetPageWidth();

        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

        {

            float height = gdpicturePDF.GetPageHeight();

            if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

            {

                //the new height of the destination area

                height = height / 2;

                if ((gdpicturePDF.SelectPage(1) == GdPictureStatus.OK) &&

                    (gdpicturePDF.DrawImage(image_name, 0, 0, width, height) == GdPictureStatus.OK) &&

                    (gdpicturePDF.DrawImage(image_name, 0, height, width, height) == GdPictureStatus.OK))

                {

                    GdPictureStatus status = gdpicturePDF.SaveToFile("test_DrawImage.pdf");

                    if (status == GdPictureStatus.OK)

                        MessageBox.Show("The example has been followed successfully and the file has been saved.", caption);

                    else

                        MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption);

                }

                else

                    MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);

            }

            else

                MessageBox.Show("The GetPageHeight() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);

        }

        else

            MessageBox.Show("The GetPageWidth() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);

    }

    else

        MessageBox.Show("The AddJpegImageFromFile() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);

}

else

    MessageBox.Show("The NewPDF() method or the NewPage() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);

gdpicturePDF.Dispose();

How to draw an image, loaded from the first page of the current PDF document, onto the newly inserted page, which has the same size as the first page, within the same PDF document.

VB.NET
C#

Dim caption As String = "Example: DrawImage"

Dim message As String = ""

Dim gdpicturePDF As New GdPicturePDF()

Dim status As GdPictureStatus = gdpicturePDF.LoadFromFile("test_images.pdf", True)

If status = GdPictureStatus.OK Then

    Dim pageCount As Integer = gdpicturePDF.GetPageCount()

    If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then

        GoTo [error]

    End If

    If gdpicturePDF.SelectPage(1) <> GdPictureStatus.OK Then

        GoTo [error]

    End If

    Dim imageCount As Integer = gdpicturePDF.GetPageImageCount()

    If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then

        GoTo [error]

    End If

    If imageCount > 0 Then

        Dim imageName As String = gdpicturePDF.GetPageImageResName(0)

        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

            Dim width As Single = gdpicturePDF.GetPageWidth()

            If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then

                GoTo [error]

            End If

            Dim height As Single = gdpicturePDF.GetPageHeight()

            If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then

                GoTo [error]

            End If

            If (gdpicturePDF.InsertPage(width, height, pageCount + 1) = GdPictureStatus.OK) AndAlso

               (gdpicturePDF.DrawImage(imageName, 0, 0, width, height) = GdPictureStatus.OK) Then

                status = gdpicturePDF.SaveToFileInc("test_images.pdf")

                If status = GdPictureStatus.OK Then

                    message = "The example has been followed successfully and the file has been saved."

                Else

                    message = "The example has been followed successfully, but the SaveToFileInc() method has failed with the status: " + status.ToString()

                End If

            End If

        Else

            message = "The GetPageImageResName() method has failed with the status: " + gdpicturePDF.GetStat().ToString()

        End If

    Else

        message = "The first page of this document doesn't contain any image."

    End If

Else

    message = "The LoadFromFile() method has failed with the status: " + status.ToString()

End If

[error]:

If message.Equals("") Then

    message = "The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString()

End If

MessageBox.Show(message, caption)

gdpicturePDF.Dispose()

string caption = "Example: DrawImage";

string message = "";

GdPicturePDF gdpicturePDF = new GdPicturePDF();

GdPictureStatus status = gdpicturePDF.LoadFromFile("test_images.pdf", true);

if (status == GdPictureStatus.OK)

{

    int pageCount = gdpicturePDF.GetPageCount();

    if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;

    if (gdpicturePDF.SelectPage(1) != GdPictureStatus.OK) goto error;

    int imageCount = gdpicturePDF.GetPageImageCount();

    if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;

    if (imageCount > 0)

    {

        string imageName = gdpicturePDF.GetPageImageResName(0);

        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

        {

            float width = gdpicturePDF.GetPageWidth();

            if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;

            float height = gdpicturePDF.GetPageHeight();

            if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;

            if ((gdpicturePDF.InsertPage(width, height, pageCount + 1) == GdPictureStatus.OK) &&

                (gdpicturePDF.DrawImage(imageName, 0, 0, width, height) == GdPictureStatus.OK))

            {

                status = gdpicturePDF.SaveToFileInc("test_images.pdf");

                if (status == GdPictureStatus.OK)

                    message = "The example has been followed successfully and the file has been saved.";

                else

                    message = "The example has been followed successfully, but the SaveToFileInc() method has failed with the status: " + status.ToString();

            }

        }

        else

            message = "The GetPageImageResName() method has failed with the status: " + gdpicturePDF.GetStat().ToString();

    }

    else

        message = "The first page of this document doesn't contain any image.";

}

else

    message = "The LoadFromFile() method has failed with the status: " + status.ToString();

error:

if (message.Equals(""))

    message = "The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString();

MessageBox.Show(message, caption);

gdpicturePDF.Dispose();

Reference

GdPicturePDF Class
GdPicturePDF Members
SetMeasurementUnit Method
SetOrigin Method
GetMeasurementUnit Method
GetOrigin Method
SelectPage Method
NewPage(Single,Single) Method
GetPageHeight Method
GetPageWidth Method
DrawPage Method
AddJpegImageFromFile Method
GetPageImageResName Method