The resource name of the font you prefer for drawing your text.

You can easily obtain this name using the AddStandardFont method or any of the AddTrueTypeFont...() methods. For further assistance, please see the Fonts section of the GdPicturePDF class in the Reference Guide.

The horizontal (X) coordinate of the destination point, where the text is to be drawn, in the current units used in the PDF document with respect to the currently defined origin, related to the currently selected page.
The vertical (Y) coordinate of the destination point, where the text is to be drawn, in the current units used in the PDF document with respect to the currently defined origin, related to the currently selected page.
The required text to draw.
Example





In This Topic

DrawText Method (GdPicturePDF)

In This Topic
Draws required text using the specified font on the currently selected page of the loaded PDF document. You also need to set the destination point, expressed in the current units defined in the PDF document, related to the actual page, where the text is to be drawn.

You can simply use the GetMeasurementUnit method to determine the currently defined units and you can easily use the SetMeasurementUnit method to reset the units according to your preference.

Syntax
'Declaration

 


Public Function DrawText( _

   ByVal FontResName As String, _

   ByVal DstX As Single, _

   ByVal DstY As Single, _

   ByVal Text As String _

) As GdPictureStatus
public GdPictureStatus DrawText( 

   string FontResName,

   float DstX,

   float DstY,

   string Text

)
public function DrawText( 

    FontResName: String;

    DstX: Single;

    DstY: Single;

    Text: String

): GdPictureStatus; 
public function DrawText( 

   FontResName : String,

   DstX : float,

   DstY : float,

   Text : String

) : GdPictureStatus;
public: GdPictureStatus DrawText( 

   string* FontResName,

   float DstX,

   float DstY,

   string* Text

) 
public:

GdPictureStatus DrawText( 

   String^ FontResName,

   float DstX,

   float DstY,

   String^ Text

)

Parameters

FontResName
The resource name of the font you prefer for drawing your text.

You can easily obtain this name using the AddStandardFont method or any of the AddTrueTypeFont...() methods. For further assistance, please see the Fonts section of the GdPicturePDF class in the Reference Guide.

DstX
The horizontal (X) coordinate of the destination point, where the text is to be drawn, in the current units used in the PDF document with respect to the currently defined origin, related to the currently selected page.
DstY
The vertical (Y) coordinate of the destination point, where the text is to be drawn, in the current units used in the PDF document with respect to the currently defined origin, related to the currently selected page.
Text
The required text to draw.

Return Value

A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.

We strongly recommend always checking this status first.

Remarks
This method is only allowed for use with non-encrypted documents.

Be aware that the values of coordinates and dimensions are expressed in the current units defined by the SetMeasurementUnit method according to the current coordinate space defined by the SetOrigin method.

Example
How to draw text with the specified attributes in the middle of a page of the loaded PDF document. 
Dim caption As String = "Example: DrawText"

Dim gdpicturePDF As GdPicturePDF = New GdPicturePDF()

Dim status As GdPictureStatus = gdpicturePDF.LoadFromFile("test.pdf", False)

If status = GdPictureStatus.OK Then

    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft)

    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitPoint)

    Dim fontName As String = gdpicturePDF.AddStandardFont(PdfStandardFont.PdfStandardFontTimesBold)

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        Dim text As String = "GdPicture.NET"

        Dim textSize As Integer = 30

        Dim textWidth As Single = gdpicturePDF.GetTextWidth(fontName, textSize, text)

        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

            gdpicturePDF.SelectPage(1)

            Dim pageWidth As Single = gdpicturePDF.GetPageWidth() 'Be careful: this function returns value in PDF points.

            Dim pageHeight As Single = gdpicturePDF.GetPageHeight() 'Be careful: this function returns value in PDF points.

            If (gdpicturePDF.SetFillColor(0, 0, 255) = GdPictureStatus.OK) AndAlso

               (gdpicturePDF.SetTextSize(textSize) = GdPictureStatus.OK) AndAlso

               (gdpicturePDF.DrawText(fontName, pageWidth / 2 - textWidth / 2, pageHeight / 2, text) = GdPictureStatus.OK) Then

                status = gdpicturePDF.SaveToFile("test_DrawText.pdf")

                If status = GdPictureStatus.OK Then

                    MessageBox.Show("The text has been successfully drawn and the file has been saved.", caption)

                Else

                    MessageBox.Show("The text has been successfully drawn," + vbCrLf + "but the file can't be saved. Status: " + status.ToString(), caption)

                End If

            Else

                MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)

            End If

        Else

            MessageBox.Show("The GetTextWidth() method has failed with the status: " + status.ToString(), caption)

        End If

    Else

        MessageBox.Show("The AddStandardFont() method has failed with the status: " + status.ToString(), caption)

    End If

Else

    MessageBox.Show("The LoadFromFile() method has failed with the status: " + status.ToString(), caption)

End If

gdpicturePDF.Dispose()
string caption = "Example: DrawText";

GdPicturePDF gdpicturePDF = new GdPicturePDF();

GdPictureStatus status = gdpicturePDF.LoadFromFile("test.pdf", false);

if (status == GdPictureStatus.OK)

{

    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft);

    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitPoint);

    string fontName = gdpicturePDF.AddStandardFont(PdfStandardFont.PdfStandardFontTimesBold);

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

    {

        string text = "GdPicture.NET";

        int textSize = 30;

        float textWidth = gdpicturePDF.GetTextWidth(fontName, textSize, text);

        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

        {

            gdpicturePDF.SelectPage(1);

            float pageWidth = gdpicturePDF.GetPageWidth(); //Be careful: this function returns value in PDF points.

            float pageHeight = gdpicturePDF.GetPageHeight(); //Be careful: this function returns value in PDF points.

            if ((gdpicturePDF.SetFillColor(0, 0, 255) == GdPictureStatus.OK) &&

                (gdpicturePDF.SetTextSize(textSize) == GdPictureStatus.OK) &&

                (gdpicturePDF.DrawText(fontName, pageWidth / 2 - textWidth / 2, pageHeight / 2, text) == GdPictureStatus.OK))

            {

                status = gdpicturePDF.SaveToFile("test_DrawText.pdf");

                if (status == GdPictureStatus.OK)

                    MessageBox.Show("The text has been successfully drawn and the file has been saved.", caption);

                else

                    MessageBox.Show("The text has been successfully drawn,\nbut the file can't be saved. Status: " + status.ToString(), caption);

            }

            else

                MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);

        }

        else

            MessageBox.Show("The GetTextWidth() method has failed with the status: " + status.ToString(), caption);

    }

    else

        MessageBox.Show("The AddStandardFont() method has failed with the status: " + status.ToString(), caption);

}

else

    MessageBox.Show("The LoadFromFile() method has failed with the status: " + status.ToString(), caption);

gdpicturePDF.Dispose();
Example
How to draw text with the specified attributes in the middle of a page of the loaded PDF document. Dim caption As String = "Example: DrawText" Dim gdpicturePDF As GdPicturePDF = New GdPicturePDF() Dim status As GdPictureStatus = gdpicturePDF.LoadFromFile("test.pdf", False) If status = GdPictureStatus.OK Then gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft) gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitPoint) Dim fontName As String = gdpicturePDF.AddStandardFont(PdfStandardFont.PdfStandardFontTimesBold) If gdpicturePDF.GetStat() = GdPictureStatus.OK Then Dim text As String = "GdPicture.NET" Dim textSize As Integer = 30 Dim textWidth As Single = gdpicturePDF.GetTextWidth(fontName, textSize, text) If gdpicturePDF.GetStat() = GdPictureStatus.OK Then gdpicturePDF.SelectPage(1) Dim pageWidth As Single = gdpicturePDF.GetPageWidth() 'Be careful: this function returns value in PDF points. Dim pageHeight As Single = gdpicturePDF.GetPageHeight() 'Be careful: this function returns value in PDF points. If (gdpicturePDF.SetFillColor(0, 0, 255) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetTextSize(textSize) = GdPictureStatus.OK) AndAlso (gdpicturePDF.DrawText(fontName, pageWidth / 2 - textWidth / 2, pageHeight / 2, text) = GdPictureStatus.OK) Then status = gdpicturePDF.SaveToFile("test_DrawText.pdf") If status = GdPictureStatus.OK Then MessageBox.Show("The text has been successfully drawn and the file has been saved.", caption) Else MessageBox.Show("The text has been successfully drawn," + vbCrLf + "but the file can't be saved. Status: " + status.ToString(), caption) End If Else MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption) End If Else MessageBox.Show("The GetTextWidth() method has failed with the status: " + status.ToString(), caption) End If Else MessageBox.Show("The AddStandardFont() method has failed with the status: " + status.ToString(), caption) End If Else MessageBox.Show("The LoadFromFile() method has failed with the status: " + status.ToString(), caption) End If gdpicturePDF.Dispose() string caption = "Example: DrawText"; GdPicturePDF gdpicturePDF = new GdPicturePDF(); GdPictureStatus status = gdpicturePDF.LoadFromFile("test.pdf", false); if (status == GdPictureStatus.OK) { gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft); gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitPoint); string fontName = gdpicturePDF.AddStandardFont(PdfStandardFont.PdfStandardFontTimesBold); if (gdpicturePDF.GetStat() == GdPictureStatus.OK) { string text = "GdPicture.NET"; int textSize = 30; float textWidth = gdpicturePDF.GetTextWidth(fontName, textSize, text); if (gdpicturePDF.GetStat() == GdPictureStatus.OK) { gdpicturePDF.SelectPage(1); float pageWidth = gdpicturePDF.GetPageWidth(); //Be careful: this function returns value in PDF points. float pageHeight = gdpicturePDF.GetPageHeight(); //Be careful: this function returns value in PDF points. if ((gdpicturePDF.SetFillColor(0, 0, 255) == GdPictureStatus.OK) && (gdpicturePDF.SetTextSize(textSize) == GdPictureStatus.OK) && (gdpicturePDF.DrawText(fontName, pageWidth / 2 - textWidth / 2, pageHeight / 2, text) == GdPictureStatus.OK)) { status = gdpicturePDF.SaveToFile("test_DrawText.pdf"); if (status == GdPictureStatus.OK) MessageBox.Show("The text has been successfully drawn and the file has been saved.", caption); else MessageBox.Show("The text has been successfully drawn,\nbut the file can't be saved. Status: " + status.ToString(), caption); } else MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption); } else MessageBox.Show("The GetTextWidth() method has failed with the status: " + status.ToString(), caption); } else MessageBox.Show("The AddStandardFont() method has failed with the status: " + status.ToString(), caption); } else MessageBox.Show("The LoadFromFile() method has failed with the status: " + status.ToString(), caption); gdpicturePDF.Dispose();
See Also

Reference

GdPicturePDF Class
GdPicturePDF Members
GetMeasurementUnit Method
SetMeasurementUnit Method
AddStandardFont Method
SetMeasurementUnit Method
SetOrigin Method
DrawTextUnderline
AddStandardFont Method
AddTrueTypeFont Method
SetMeasurementUnit Method
SetOrigin Method