The constant that represents the paper source to be used. Please refer to the System.Drawing.Printing.PaperSourceKind enumeration for correct values. The standard values are listed below (please see the corresponding ordering number):
  1. Upper
  2. Lower
  3. Middle
  4. Manual
  5. Enveloper
  6. ManualFeed
  7. AutomaticFeed
  8. TractorFeed
  9. SmallFormat
  10. LargeFormat
  11. LargeCapacity

14. Cassette

15. FormSource

257. or greater: Custom

Example





In This Topic

PrintSetPaperBin(Int32) Method

In This Topic
Sets up the paper source, means the paper tray, from which the printer gets paper, used by the active printer. The value matches up to the PaperSource.Kind property of the default paper settings.
Syntax
'Declaration

 

Public Overloads Function PrintSetPaperBin( _

   ByVal PaperBin As Integer _

) As Boolean
public bool PrintSetPaperBin( 

   int PaperBin

)
public function PrintSetPaperBin( 

    PaperBin: Integer

): Boolean; 
public function PrintSetPaperBin( 

   PaperBin : int

) : boolean;
public: bool PrintSetPaperBin( 

   int PaperBin

) 
public:

bool PrintSetPaperBin( 

   int PaperBin

) 

Parameters

PaperBin
The constant that represents the paper source to be used. Please refer to the System.Drawing.Printing.PaperSourceKind enumeration for correct values. The standard values are listed below (please see the corresponding ordering number):
  1. Upper
  2. Lower
  3. Middle
  4. Manual
  5. Enveloper
  6. ManualFeed
  7. AutomaticFeed
  8. TractorFeed
  9. SmallFormat
  10. LargeFormat
  11. LargeCapacity

14. Cassette

15. FormSource

257. or greater: Custom

Return Value

true if the method has been followed successfully, otherwise false. Please use the GetStat method or the PrintGetStat method to determine the specific reason for the method's failure.
Remarks
Just to remind you that the active printer is the printer identified by the PrintGetActivePrinter method or set by the PrintSetActivePrinter method and it is dedicated to executing all subsequent print jobs using this class as well as utilizing all by you altered printer settings.
Example
How to set up some printer properties to be used for printing the current document.
Dim caption As String = "Example: PrintSetPaperBin"

Dim gdpicturePDF As GdPicturePDF = New GdPicturePDF()

Dim message As String = ""

If gdpicturePDF.LoadFromFile("document_to_print.pdf", False) = GdPictureStatus.OK Then

    Dim curPrinter As String = gdpicturePDF.PrintGetActivePrinter()

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        message = "Active printer: " + curPrinter + vbCrLf

    Else

        message = "The PrintGetActivePrinter() method has failed with the status: " + gdpicturePDF.GetStat()

    End If

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        If gdpicturePDF.PrintSetPaperBin(7) Then

            message = message + "    paper bin: 7 (automatic feed)" + vbCrLf

        Else

            message = "The PrintSetPaperBin() method has failed with the status: " + gdpicturePDF.GetStat()

        End If

    End If

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        Dim pSize As System.Drawing.Printing.PaperSize = New System.Drawing.Printing.PaperSize("My custom size", 120, 250)

        gdpicturePDF.PrintSetPaperSize(pSize)

        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

            message = message + "    paper size: 120, 250" + vbCrLf

        Else

            message = "The PrintSetPaperSize() method has failed with the status: " + gdpicturePDF.GetStat()

        End If

    End If

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        gdpicturePDF.PrintSetFromToPage(2, 4)

        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

            message = message + "    page range: 2-4" + vbCrLf

        Else

            message = "The PrintSetFromToPage() method has failed with the status: " + gdpicturePDF.GetStat()

        End If

    End If

    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then

        If gdpicturePDF.Print() = GdPictureStatus.OK Then

            message = message + "The file has been printed successfully using new settings."

        Else

            message = message + "The file can't be printed." + vbCrLf + "Status: " + gdpicturePDF.PrintGetStat().ToString()

            If gdpicturePDF.PrintGetStat() = GdPictureStatus.PrintingException Then

                message = message + "    Error: " + gdpicturePDF.PrintGetLastError()

            End If

        End If

    Else

        message = "The example has NOT been followed successfully. Status: " + gdpicturePDF.GetStat().ToString()

    End If

Else

    message = "The file can't be loaded. Status: " + gdpicturePDF.GetStat().ToString()

End If

MessageBox.Show(message, caption)

gdpicturePDF.Dispose()
string caption = "Example: PrintSetPaperBin";

GdPicturePDF gdpicturePDF = new GdPicturePDF();

string message = "";

if (gdpicturePDF.LoadFromFile("document_to_print.pdf", false) == GdPictureStatus.OK)

{

    string curPrinter = gdpicturePDF.PrintGetActivePrinter();

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

        message = "Active printer: " + curPrinter + "\n";

    else

        message = "The PrintGetActivePrinter() method has failed with the status: " + gdpicturePDF.GetStat();

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

    {

        if (gdpicturePDF.PrintSetPaperBin(7))

            message = message + "    paper bin: 7 (automatic feed)\n";

        else

            message = "The PrintSetPaperBin() method has failed with the status: " + gdpicturePDF.GetStat();

    }

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

    {

        System.Drawing.Printing.PaperSize pSize = new System.Drawing.Printing.PaperSize("My custom size", 120, 250);

        gdpicturePDF.PrintSetPaperSize(pSize);

        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

            message = message + "    paper size: 120, 250\n";

        else

            message = "The PrintSetPaperSize() method has failed with the status: " + gdpicturePDF.GetStat();

    }

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

    {

        gdpicturePDF.PrintSetFromToPage(2,4);

        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

            message = message + "    page range: 2-4\n";

        else

            message = "The PrintSetFromToPage() method has failed with the status: " + gdpicturePDF.GetStat();

    }

    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)

    {

        if (gdpicturePDF.Print() == GdPictureStatus.OK)

        {

            message = message + "The file has been printed successfully using new settings.";

        }

        else

        {

            message = message + "The file can't be printed.\nStatus: " + gdpicturePDF.PrintGetStat().ToString();

            if (gdpicturePDF.PrintGetStat() == GdPictureStatus.PrintingException)

                message = message + "    Error: " + gdpicturePDF.PrintGetLastError();

        }

    }

    else

    {

        message = "The example has NOT been followed successfully. Status: " + gdpicturePDF.GetStat().ToString();

    }

}

else

{

    message = "The file can't be loaded. Status: " + gdpicturePDF.GetStat().ToString();

}

MessageBox.Show(message, caption);

gdpicturePDF.Dispose();
See Also