PrintSetPaperSize Method (GdViewer)
In This Topic
Sets the paper size, means the type of the paper, to be used by the active printer.
Syntax
Parameters
- PaperSize
- A PaperSize object that defines the new value of the paper size to be used.
Return Value
A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.
We strongly recommend always checking this status first.
Example
How to set up some printer properties to be used for printing the displayed document.
'We assume that the GdViewer1 control has been properly integrated.
Dim message As String = ""
Dim curPrinter As String = GdViewer1.PrintGetActivePrinter()
If GdViewer1.GetStat() = GdPictureStatus.OK Then
message = "Active printer: " + curPrinter + vbCrLf
Else
message = "The PrintGetActivePrinter() method has failed with the status: " + GdViewer1.GetStat()
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
If GdViewer1.PrintSetPaperBin(7) Then
message = message + " paper bin: 7 (automatic feed)" + vbCrLf
Else
message = "The PrintSetPaperBin() method has failed with the status: " + GdViewer1.GetStat()
End If
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
Dim pSize As System.Drawing.Printing.PaperSize = New System.Drawing.Printing.PaperSize("My custom size", 120, 250)
GdViewer1.PrintSetPaperSize(pSize)
If GdViewer1.GetStat() = GdPictureStatus.OK Then
message = message + " paper size: 120, 250" + vbCrLf
Else
message = "The PrintSetPaperSize() method has failed with the status: " + GdViewer1.GetStat()
End If
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
GdViewer1.PrintSetFromToPage(2, 4)
If GdViewer1.GetStat() = GdPictureStatus.OK Then
message = message + " page range: 2-4" + vbCrLf
Else
message = "The PrintSetFromToPage() method has failed with the status: " + GdViewer1.GetStat()
End If
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
'We assume that the required document is displayed in the GdViewer1 control.
If GdViewer1.Print() = GdPictureStatus.OK Then
message = message + "The file has been printed successfully using new settings."
Else
message = message + "The file can't be printed." + vbCrLf + "Status: " + GdViewer1.PrintGetStat().ToString()
If GdViewer1.PrintGetStat() = GdPictureStatus.PrintingException Then message = message + " Error: " + GdViewer1.PrintGetLastError()
End If
Else
message = "The example has NOT been followed successfully. Status: " + GdViewer1.GetStat().ToString()
End If
MessageBox.Show(message, "GdViewer.PrintSetPaperSize")
//We assume that the GdViewer1 control has been properly integrated.
string message = "";
string curPrinter = GdViewer1.PrintGetActivePrinter();
if (GdViewer1.GetStat() == GdPictureStatus.OK)
message = "Active printer: " + curPrinter + "\n";
else
message = "The PrintGetActivePrinter() method has failed with the status: " + GdViewer1.GetStat();
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
if (GdViewer1.PrintSetPaperBin(7))
message = message + " paper bin: 7 (automatic feed)\n";
else
message = "The PrintSetPaperBin() method has failed with the status: " + GdViewer1.GetStat();
}
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
System.Drawing.Printing.PaperSize pSize = new System.Drawing.Printing.PaperSize("My custom size", 120, 250);
GdViewer1.PrintSetPaperSize(pSize);
if (GdViewer1.GetStat() == GdPictureStatus.OK)
message = message + " paper size: 120, 250\n";
else
message = "The PrintSetPaperSize() method has failed with the status: " + GdViewer1.GetStat();
}
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
GdViewer1.PrintSetFromToPage(2, 4);
if (GdViewer1.GetStat() == GdPictureStatus.OK)
message = message + " page range: 2-4\n";
else
message = "The PrintSetFromToPage() method has failed with the status: " + GdViewer1.GetStat();
}
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
//We assume that the required document is displayed in the GdViewer1 control.
if (GdViewer1.Print() == GdPictureStatus.OK)
{
message = message + "The file has been printed successfully using new settings.";
}
else
{
message = message + "The file can't be printed.\nStatus: " + GdViewer1.PrintGetStat().ToString();
if (GdViewer1.PrintGetStat() == GdPictureStatus.PrintingException)
message = message + " Error: " + GdViewer1.PrintGetLastError();
}
}
else
{
message = "The example has NOT been followed successfully. Status: " + GdViewer1.GetStat().ToString();
}
MessageBox.Show(message, "GdViewer.PrintSetPaperSize");
Example
How to set up some printer properties to be used for printing the displayed document.
'We assume that the GdViewer1 control has been properly integrated.
Dim message As String = ""
Dim curPrinter As String = GdViewer1.PrintGetActivePrinter()
If GdViewer1.GetStat() = GdPictureStatus.OK Then
message = "Active printer: " + curPrinter + vbCrLf
Else
message = "The PrintGetActivePrinter() method has failed with the status: " + GdViewer1.GetStat()
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
If GdViewer1.PrintSetPaperBin(7) Then
message = message + " paper bin: 7 (automatic feed)" + vbCrLf
Else
message = "The PrintSetPaperBin() method has failed with the status: " + GdViewer1.GetStat()
End If
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
Dim pSize As System.Drawing.Printing.PaperSize = New System.Drawing.Printing.PaperSize("My custom size", 120, 250)
GdViewer1.PrintSetPaperSize(pSize)
If GdViewer1.GetStat() = GdPictureStatus.OK Then
message = message + " paper size: 120, 250" + vbCrLf
Else
message = "The PrintSetPaperSize() method has failed with the status: " + GdViewer1.GetStat()
End If
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
GdViewer1.PrintSetFromToPage(2, 4)
If GdViewer1.GetStat() = GdPictureStatus.OK Then
message = message + " page range: 2-4" + vbCrLf
Else
message = "The PrintSetFromToPage() method has failed with the status: " + GdViewer1.GetStat()
End If
End If
If GdViewer1.GetStat() = GdPictureStatus.OK Then
'We assume that the required document is displayed in the GdViewer1 control.
If GdViewer1.Print() = GdPictureStatus.OK Then
message = message + "The file has been printed successfully using new settings."
Else
message = message + "The file can't be printed." + vbCrLf + "Status: " + GdViewer1.PrintGetStat().ToString()
If GdViewer1.PrintGetStat() = GdPictureStatus.PrintingException Then message = message + " Error: " + GdViewer1.PrintGetLastError()
End If
Else
message = "The example has NOT been followed successfully. Status: " + GdViewer1.GetStat().ToString()
End If
MessageBox.Show(message, "GdViewer.PrintSetPaperSize")
//We assume that the GdViewer1 control has been properly integrated.
string message = "";
string curPrinter = GdViewer1.PrintGetActivePrinter();
if (GdViewer1.GetStat() == GdPictureStatus.OK)
message = "Active printer: " + curPrinter + "\n";
else
message = "The PrintGetActivePrinter() method has failed with the status: " + GdViewer1.GetStat();
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
if (GdViewer1.PrintSetPaperBin(7))
message = message + " paper bin: 7 (automatic feed)\n";
else
message = "The PrintSetPaperBin() method has failed with the status: " + GdViewer1.GetStat();
}
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
System.Drawing.Printing.PaperSize pSize = new System.Drawing.Printing.PaperSize("My custom size", 120, 250);
GdViewer1.PrintSetPaperSize(pSize);
if (GdViewer1.GetStat() == GdPictureStatus.OK)
message = message + " paper size: 120, 250\n";
else
message = "The PrintSetPaperSize() method has failed with the status: " + GdViewer1.GetStat();
}
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
GdViewer1.PrintSetFromToPage(2, 4);
if (GdViewer1.GetStat() == GdPictureStatus.OK)
message = message + " page range: 2-4\n";
else
message = "The PrintSetFromToPage() method has failed with the status: " + GdViewer1.GetStat();
}
if (GdViewer1.GetStat() == GdPictureStatus.OK)
{
//We assume that the required document is displayed in the GdViewer1 control.
if (GdViewer1.Print() == GdPictureStatus.OK)
{
message = message + "The file has been printed successfully using new settings.";
}
else
{
message = message + "The file can't be printed.\nStatus: " + GdViewer1.PrintGetStat().ToString();
if (GdViewer1.PrintGetStat() == GdPictureStatus.PrintingException)
message = message + " Error: " + GdViewer1.PrintGetLastError();
}
}
else
{
message = "The example has NOT been followed successfully. Status: " + GdViewer1.GetStat().ToString();
}
MessageBox.Show(message, "GdViewer.PrintSetPaperSize");
See Also